Toyota 4Runner manuals

Toyota 4Runner: Front Wiper Rubber

Components

COMPONENTS

ILLUSTRATION


Replacement

REPLACEMENT

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH and LH sides.
  • The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT WIPER BLADE

(a) Open the front wiper blade holder.

(b) Remove the front wiper blade from the front wiper arm as shown in the illustration.

Text in Illustration

*1

Front Wiper Blade

*2

Front Wiper Blade Holder

*3

Front Wiper Arm

NOTICE:

Do not bend the front wiper arm with the front wiper blade removed because the arm tip could damage the windshield surface.


2. REMOVE WIPER RUBBER

(a) Remove the wiper rubber and wiper rubber backing plates from the front wiper blade.


(b) Remove the 2 wiper rubber backing plates from the wiper rubber.


3. INSTALL WIPER RUBBER

(a) Install the 2 wiper rubber backing plates to the wiper rubber.

NOTICE:

  • Align the protrusions on the wiper rubber and the notches of the backing plates.
  • Align the curves of the backing plates and the glass.

(b) Install the wiper rubber to the front wiper blade as shown in the illustration.

NOTICE:

Push the wiper rubber into the wiper blade firmly so that if engages securely.


4. INSTALL FRONT WIPER BLADE

(a) Install the front wiper blade as shown in the illustration.

Text in Illustration

*1

Front Wiper Blade Holder


Installation
INSTALLATION PROCEDURE 1. INSTALL WIPER MOTOR WIRE (a) Attach the claw to install the wiper motor wire. 2. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY (a) Using a T30 "TORX" socket, install ...

Rear Wiper Motor
...

Other materials about Toyota 4Runner:

Open in Motor LH Circuit (22,24)
DESCRIPTION When there is an open in the side auto step motor circuit, the side auto step controller ECU assembly does not operate the automatic running board. DTC No. Detection Condition Trouble Area 22 ...

Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. REMOVE REAR SEAT ASSEMBLY RH (a) Remove the rear No. 1 seat assembly RH (See page ). 2. REMOVE NO. 1 SEATBACK BOARD SUB-ASSEM ...

© 2016-2024 | www.to4runner.net

0.0246