DESCRIPTION
If GPS satellite signals cannot be acquired for 24 consecutive kilometers (15 consecutive miles), this DTC is set.
DTC Code |
DTC Detection Condition |
Trouble Area |
---|---|---|
B1583 |
GPS signal is not received for 24 km (15 miles). |
|
CAUTION / NOTICE / HINT
HINT:
If either DTC B15C0 or B15C1 is output at the same time as DTC B1583, perform troubleshooting for DTC B15C0 or B15C1 first.
PROCEDURE
1. |
CHECK TELEPHONE AND GPS ANTENNA |
(a) Check that there are no problems with the telephone and GPS antenna.
OK:
The antenna is not excessively dirty and there are no objects blocking signal reception.
NG |
REMOVE FOREIGN OBJECT |
|
2. |
REPLACE TELEPHONE AND GPS ANTENNA |
(a) Replace the telephone and GPS antenna (See page ).
|
3. |
CLEAR DTC |
(a) Clear the DTC (See page ).
|
4. |
CHECK FOR DTC |
(a) Drive the vehicle for at least 24 km (15 miles).
(b) Turn the ignition switch off.
(c) Connect the Techstream to the DLC3.
(d) Turn the ignition switch to ON and wait for 10 seconds.
(e) Perform "Health Check" and check for historic DTCs (See page ).
Result |
Proceed to |
---|---|
DTC B1583 is output |
A |
DTC B1583 is not output |
B |
B |
END |
|
5. |
REPLACE DCM (TELEMATICS TRANSCEIVER) |
(a) Replace the DCM (Telematics Transceiver) (See page ).
NOTICE:
NEXT |
PERFORM DCM ACTIVATION |
Data List / Active Test
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very usefu ...
No Answer-Back
DESCRIPTION
In some cases, the wireless door lock control functions are normal but the hazard
warning light and/or wireless door lock buzzer answer-back function(s) does not
operate. In such cases, hazard warning light and wireless door lock buzzer signal ...