Head restraints are provided for all seats.
Adjusting the head restraints
Front and second seats
1. Up Pull the head restraints up.
2. Down Push the head restraint down while pushing the lock release button.
Folding the head restraints
Second seats (vehicles without third row seats)
1. To use
2. To fold
Third seats (vehicles with third row seats)
1. To use
2. To fold
Removing the head restraints (except third row seats)
Pull the head restraint up while pressing the lock release button.
Installing the head restraints (except third row seats)
Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint.
Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Adjusting the second center seat head restraint
Always raise the head restraint one level from the stowed position when using.
CAUTION
Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
• Use the head restraints designed for each respective seat.
• Adjust the head restraints to the correct position at all times.
• After adjusting the head restraints, push down on them and make sure they are locked in position.
• Do not drive with the head restraints removed.
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE AUTOMATIC TRANSMISSION CASE O-RING
(a) Remove the O-ring from the oil pump assembly.
2. FIX OIL PUMP ASSEMBLY
(a) Place the oil pump body on the torque convert ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR FLOOR SIDE AIRBAG SENSOR
(a) Turn the ignition switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-)
bat ...