No Answer-BackDisassembly
DISASSEMBLY
PROCEDURE
1. REMOVE FRONT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same procedure for all front propeller shaft universal joint spider bearing.
(a) Place matchmarks on the flange yoke and sleeve yoke.
Text in Illustration
...
Installation
INSTALLATION
PROCEDURE
1. INSTALL SLIDING ROOF HOUSING SUB-ASSEMBLY
(a) Temporarily install the housing with the 8 bolts (vehicle body side) and
8 nuts.
(b) Tighten the 8 nuts in alphabetical order.
Torque:
5.5 N·m {56 kgf·cm, 49 in·lbf}
(c) Tight ...