Toyota 4Runner manuals

Toyota 4Runner: If your vehicle has to be stopped in an emergency

Toyota 4Runner Owners Manual / When trouble arises / If the engine will not start / If your vehicle has to be stopped in an emergency

Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure:

Steadily step on the brake pedal
with both feet and firmly depress it.

Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.

Shift the shift lever to N.


If the shift lever is shifted to N

  After slowing down, stop
the vehicle in a safe place by the road.

Stop the engine.


If the shift lever cannot be shifted to N

Keep depressing the brake pedal
with both feet to reduce vehicle speed as much as possible.


Vehicles without a smart key system: Stop the engine by turning the engine switch to the “ACC” position.


Vehicles with a smart key system: To stop the engine, press and hold the “ENGINE START STOP” switch for 2 consecutive seconds or more, or press it briefly 3 times or more in succession.


Stop the vehicle in a safe place by the road.

CAUTION

If the engine has to be turned off while driving

• Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn.

Decelerate as much as possible before turning off the engine.

• Vehicles without a smart key system: Never attempt to remove the key, as doing so will lock the steering wheel.

If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: Stop the engine. Set the parking brake and shift the shift lever to P. Remove the mud, s ...

Vehicle specifications
Detailed vehicle information. ...

Other materials about Toyota 4Runner:

AV Signal Stoppage (Low Battery Voltage) (B158F)
DESCRIPTION This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the radio and display receiver assembly dropping temporarily. DTC No. Detection Item DTC Detection Condition ...

Jam Protection Function does not Operate
DESCRIPTION This problem may occur in all door windows. The jam protection function operates within a specified range during the manual up or auto up operation. PROCEDURE 1. PERFORM INITIALIZATION (a) ...

© 2016-2024 | www.to4runner.net

0.0244