Toyota 4Runner manuals

Toyota 4Runner: Inside rear view mirror

Glare from the headlights of vehicles behind can be reduced by using the following functions:

Manual anti-glare inside rear view mirror


1. Normal position
2. Anti-glare position

Auto anti-glare inside rear view mirror

In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.


Turns automatic mode on/off

The indicator comes on when automatic mode is turned on.

Vehicles without a smart key system

The mirror will revert to the automatic mode each time the engine switch is turned to the “ON” position.

Vehicles with a smart key system

The mirror will revert to the automatic mode each time the “ENGINE START STOP” switch is turned to IGNITION ON mode.

Adjusting the height of rear view mirror


Adjust the height of the rear view mirror by moving it up and down.

To prevent sensor error (vehicles with auto anti-glare inside rear view mirror)


To ensure that the sensors operate properly, do not touch or cover them.

CAUTION

Caution while driving

Do not adjust the position of the mirror while driving.

Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.

Steering wheel
The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and push the lever down. Adjust to the ideal position by moving the steering wheel horizontally and vertic ...

Outside rear view mirrors
Mirror angle can be adjusted using the switch. To select a mirror to adjust, press the switch. 1. Left 2. Right To adjust the mirror, press the switch. 1. Up 2. Right 3. Down 4. Left ...

Other materials about Toyota 4Runner:

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. CHECK SHIFT LOCK OPERATION (a) Move the shift lever to P. (b) Turn the ignition switch off. (c) Check that the shift lever cannot be moved from P. (d) Turn the ignition switch to on (IG), depress the brake pedal and che ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: A bolt without a torque specification is shown in the standard bolt chart (See page ). PROCEDURE 1. INSTALL DECK SIDE TRIM CUP HOLDER LH (w/ Rear No. 2 Seat) (a) Attach the 2 claws to install the deck side tr ...

© 2016-2024 | www.to4runner.net

0.0184