Toyota 4Runner: Inspection

Toyota 4Runner Service Manual / Vehicle Interior / Door Lock / Door Control Switch / Inspection

INSPECTION

PROCEDURE

1. INSPECT DOOR CONTROL SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
4 (L) - 3 (E)	Lock	Below 1 Ω
4 (L) - 3 (E)	Off	10 kΩ or higher
2 (UL) - 3 (E)	Unlock	Below 1 Ω
2 (UL) - 3 (E)	Off	10 kΩ or higher

If the result is not as specified, replace the door control switch assembly.

Text in Illustration

Component without harness connected

(Door Control Switch Assembly)

Unlock

Lock

Removal

REMOVAL PROCEDURE 1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH (a) Detach the 2 clips and remove the front door lower frame bracket garnish RH. ...

Other materials about Toyota 4Runner:

Integration Relay
On-vehicle Inspection ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE NO. 1 RELAY BLOCK COVER (a) Remove the No. 1 relay block cover. 2. INSPECT NO. 1 INTEGRATION RELAY (a) Using a screwdriver, detach the 2 claws and disconnect the No. 1 integ ...

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT 2. INSPECT BATTERY VOLTAGE ...

Toyota 4Runner: Inspection

Components

Removal

Other materials about Toyota 4Runner: