Toyota 4Runner: Inspection

Toyota 4Runner Service Manual / Vehicle Interior / Heating / Air Conditioning / Front Evaporator Temperature Sensor / Inspection

INSPECTION

PROCEDURE

1. INSPECT NO. 1 COOLER THERMISTOR

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1 - 2	-10°C (14°F)	7.30 to 9.10 kΩ
1 - 2	-5°C (23°F)	5.65 to 6.95 kΩ
1 - 2	0°C (32°F)	4.40 to 5.35 kΩ
1 - 2	5°C (41°F)	3.40 to 4.15 kΩ
1 - 2	10°C (50°F)	2.70 to 3.25 kΩ
1 - 2	15°C (59°F)	2.14 to 2.58 kΩ
1 - 2	20°C (68°F)	1.71 to 2.05 kΩ
1 - 2	25°C (77°F)	1.38 to 1.64 kΩ
1 - 2	30°C (86°F)	1.11 to 1.32 kΩ

HINT:

As the temperature increases, the resistance decreases (refer to the graph).

NOTICE:

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.

When measuring the resistance, make sure the sensor temperature is almost the same as the ambient temperature.

If the result is not as specified, replace the No. 1 cooler thermistor.

Text in Illustration

*1	Sensor
*a	Component without harness connected (No. 1 Cooler Thermistor)
*b	Resistance (kΩ)
*c	Temperature (°C(°F))

Removal

REMOVAL PROCEDURE 1. REMOVE AIR CONDITIONING UNIT (a) Remove the air conditioning unit (See page ). ...

Installation

INSTALLATION PROCEDURE 1. INSTALL AIR CONDITIONING UNIT (a) Install the air conditioning unit (See page ). ...

Other materials about Toyota 4Runner:

How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT: Use these procedures to troubleshoot the push-button start function. *: Use the Techstream. PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP NEXT ...

Lost Communication with ECM / PCM (U0100,U0129,U0142,U0155)
DESCRIPTION The power management control ECU receives information from 2 sources. It receives information via a direct line and via the CAN communication line. If the information from these 2 sources is inconsistent, this DTC is stored. HINT: When the p ...