Toyota 4Runner: Inspection

Toyota 4Runner Service Manual / Vehicle Interior / Seat Belt / Front Seat Outer Belt Assembly / Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY

CAUTION:

Do not disassemble the retractor.

(a) Before installing the seat belt, check the ELR.

(1) When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks. If the operation is not as specified, replace the seat belt assembly.

(b) for Passenger Seat:

Check the fastening function of the child restraint system.

NOTICE:

The check should be performed with the outer belt installed.

(1) When the belt is pulled out fully, check that the belt automatically starts to retract.

(2) After the belt is fully retracted, check that the belt can be pulled out and retracted again.

If the operation is not as specified, replace the belt assembly.

Text in Illustration

*a	Unlock
*b	Lock
*c	45°

Removal

REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE ...

Installation

INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. A bolt without a torque specification is sh ...

Other materials about Toyota 4Runner:

Precaution
PRECAUTION 1. KINETIC DYNAMIC SUSPENSION SYSTEM CAUTION: Be sure to check the pipe connections and whether or not any hydraulic circuit parts are damaged before performing work, as the hydraulic circuits become highly pressurized during air ...

Customize Parameters
CUSTOMIZE PARAMETERS 1. METER/GAUGE SYSTEM (a) Combination Meter NOTICE: Record the current settings before customizing. When the customer requests a change in a function, first make sure that the function can be customized. HINT: T ...