Toyota 4Runner: Inspection
INSPECTION
PROCEDURE
1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
Unlock position |
Below 1 Ω |
|
1 - 2 |
Lock position |
10 kΩ or higher |
If the result is not as specified, replace the hood lock assembly.
Text in Illustration|
*a |
Unlock Position |
*b |
Lock Position |
|
*c |
Component without harness connected (Hood Lock Assembly (Engine Hood Courtesy Switch)) |
- |
- |
Components
COMPONENTS
ILLUSTRATION
...
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System)
(See page )
2. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System)
(See page )
3. REMOVE HIGH PI ...
Other materials about Toyota 4Runner:
Transmitter ID not Received in Main Mode (C2126/26)
DESCRIPTION
After all IDs are registered, DTC C2126/26 is stored in the tire pressure warning
ECU and the tire pressure warning light blinks for 1 minute and then comes on.
When the tire pressure warning ECU successfully receives information from all
the ...
Operating the lights and wipers
Headlight switch
The headlights can be operated manually or automatically.
Turning the end of the lever turns on the lights as follows:
Type A
1. The daytime running lights
turn on.
2. The side marker,
parking, tail, license plate, daytime r ...
0.0069