Toyota 4Runner: Inspection

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Audio / Video / Luggage Speaker / Inspection

INSPECTION

PROCEDURE

1. INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
1 (WF1+) - 3 (WF1-)	Always	1.6 to 2.4 Ω
2 (WF2+) - 4 (WF2-)	Always	1.6 to 2.4 Ω

Text in Illustration

*a	Component without harness connected (No. 1 Speaker Assembly with Box)

If the result is not as specified, replace the No. 1 speaker assembly with box.

Removal

REMOVAL PROCEDURE 1. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) 2. REMOVE QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat) 3. REMOVE REAR DOOR SCUFF PLATE RH 4. REMOVE REAR DOOR ...

Installation

INSTALLATION PROCEDURE 1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY (a) Install the stereo component amplifier to the No. 1 speaker assembly with box with the 3 bolts. 2. INSTALL NO. 1 SPEAKER ...

Other materials about Toyota 4Runner:

Data List / Active Test
DATA LIST / ACTIVE TEST 1. DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the T ...

Door Control Transmitter(w/ Smart Key System)
Components COMPONENTS ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT NOTICE: Take extra care when handling these precision electronic components. PROCEDURE 1. REMOVE TRANSMITTER BATTERY (a) Push the release hook knob and extrac ...