INSPECTION
PROCEDURE
1. INSPECT REAR DIFFERENTIAL LOCK SLEEVE
(a) Install the sleeve to the differential case (LH) and check that it moves smoothly.
(b) Install the side gear to the sleeve and check that it moves smoothly.
(c) Using a feeler gauge, measure the clearance between the shift fork and sleeve. Maximum clearance: 0.15 to 0.35 mm (0.0059 to 0.0138 in.) |
|
2. INSPECT DIFFERENTIAL PINION AND SIDE GEAR
(a) Check that there is no damage to the differential pinion or differential side gear.
If the differential pinion and/or differential side gear is damaged, replace the differential.
3. INSPECT DIFFERENTIAL CASE
(a) Check that the differential case is not damaged.
If the differential case is damaged, replace it.
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH
(a) Detach the 2 clips and remove the front door lower frame bracket
garnish RH.
2. REMOVE DOOR NO. 2 INSIDE HANDLE BEZEL RH
...
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT BRAKE BOOSTER ASSEMBLY
(a) Airtightness check
(1) Start the engine and stop it after 1 or 2 minutes. Slowly depress
the brake pedal several times.
If the pedal can be depressed to the floor the f ...