Toyota 4Runner: Inspection

Toyota 4Runner Service Manual / Drivetrain / Axle And Differential / Rear Differential Carrier Assembly(w/o Differential Lock) / Inspection

INSPECTION

PROCEDURE

1. INSPECT DIFFERENTIAL PINION AND SIDE GEAR

(a) Check that there is no damage to the differential pinion or differential side gear.

If the differential pinion and/or differential side gear is damaged, replace the differential.

2. INSPECT DIFFERENTIAL CASE

(a) Check that the differential case is not damaged.

If the differential case is damaged, replace it.

Disassembly

DISASSEMBLY PROCEDURE 1. FIX REAR DIFFERENTIAL CARRIER ASSEMBLY IN PLACE 2. INSPECT RUNOUT OF REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY REAR (a) Using a dial indicator, measure the runou ...

Reassembly

REASSEMBLY PROCEDURE 1. ASSEMBLE DIFFERENTIAL CASE (a) Install the rear differential side gear thrust washer to the rear differential side gear. (b) Install the rear differential pinion thrust ...

Other materials about Toyota 4Runner:

ECU Power Source Circuit
DESCRIPTION This circuit provides power to operate the transponder key ECU assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure. PROCEDURE ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very usefu ...