INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL POWER LIFT STEP ASSEMBLY
(a) Install the power lift step assembly with the 2 nuts and 4 bolts.
Torque:
16 N·m {163 kgf·cm, 12 ft·lbf}
(b) Connect the connector.
2. INSTALL STEP PLATE
(a) Open the door and deploy the side auto step fully.
(b) Using a 5 mm hexagon wrench, install the step plate with the 4 hexagon bolts. Torque: 12 N·m {122 kgf·cm, 9 ft·lbf} HINT: After replacing the power lift step assembly with a new one, install the step plate, and then cut off the clamp with the power lift step assembly extended. Text in Illustration
|
|
3. INSTALL ROCKER PANEL MOULDING (w/ Intuitive Parking Assist System)
(See page )
Rear differential lock system
The rear differential lock system is provided for use only when wheel
spinning occurs in a ditch or on a slippery or rugged surface.
The rear differential lock system is effective in case one of the rear wheels
is spinning.
Press the switch to lock the ...
Rear Wiper does not Operate
DESCRIPTION
The windshield wiper switch controls the rear wiper motor.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
HINT:
Since the wiper and washer system has functions that use LIN communication, first
confirm that there is no malfunction in the communica ...