Toyota 4Runner: Installation

Toyota 4Runner Service Manual / Vehicle Exterior / Exterior Panels / Trim / Rear Spoiler / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart (See page ).

PROCEDURE

1. INSTALL REAR NO. 2 SPOILER CLIP

HINT:

Use the same procedure to install the rear No. 2 spoiler clip on the other side.

(a) Attach the 2 claws to install a new rear No. 2 spoiler clip.

2. INSTALL REAR SPOILER SUB-ASSEMBLY

(a) Attach the 3 claws to install the rear spoiler.

(b) Connect the connector.

3. INSTALL REAR NO. 1 SPOILER COVER

(a) Attach the 4 clips to install the rear No. 1 spoiler cover.

Reassembly

REASSEMBLY CAUTION / NOTICE / HINT HINT: When installing the rear spoiler protector, heat the rear spoiler surface using a heat light. Standard: Item Temperature ...

Rocker Panel Moulding

Components COMPONENTS ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for both the RH and LH sides. The procedure listed below is for the LH ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY (a) Install the stereo component amplifier to the No. 1 speaker assembly with box with the 3 bolts. 2. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX (a) Attach the 2 claws, lower ...

Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Tire pressure warning system DTC Code Detection Item See page C2111/11 Transmitter ID1 Operation Stop C2112/12 Transmitter ID2 ...