Toyota 4Runner: Installation

Toyota 4Runner Service Manual / Vehicle Exterior / Exterior Panels / Trim / Side Moulding / Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH

(a) Install new 9 clips to the front fender moulding sub-assembly LH.

(b) Attach the 9 clips to install the front fender moulding sub-assembly LH.

(d) w/ Intuitive Parking Assist System:

(1) Install the clip.

(e) Install a new grommet.

2. INSTALL ROCKER PANEL MOULDING COVER LH (w/o Intuitive Parking Assist System)

(a) Attach the 2 clips to install the rocker panel moulding cover LH.

(b) Install the screw.

3. INSTALL ROCKER PANEL MOULDING LH (w/ Intuitive Parking Assist System)

4. INSTALL FRONT FENDER MUDGUARD LH (w/o Intuitive Parking Assist System)

5. INSTALL FRONT FENDER MUDGUARD LH (w/ Intuitive Parking Assist System)

6. INSTALL NO. 3 OUTSIDE MOULDING RETAINER

(a) Attach the claw to install the No. 3 outside moulding retainer.

(b) Install the screws.

7. INSTALL REAR DOOR OUTSIDE MOULDING LH (w/o Intuitive Parking Assist System)

(a) Install new 7 clips to the rear door outside moulding LH.

(b) Attach the 7 clips and 2 claws to install the rear door outside moulding LH.

8. INSTALL REAR DOOR OUTSIDE MOULDING LH (w/ Intuitive Parking Assist System)

(a) Install new 7 clips to the rear door outside moulding LH.

(b) Attach the 7 clips and 2 claws to install the rear door outside moulding LH.

9. INSTALL REAR QUARTER OUTSIDE MOULDING LH

(a) Install new 4 clips to the rear quarter outside moulding LH.

(b) Attach the 4 clips to install the rear quarter outside moulding LH.

Reassembly

REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. When installing the pad, heat the moulding su ...

Side Step

Components COMPONENTS ILLUSTRATION ILLUSTRATION Disassembly DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed b ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION PROCEDURE 1. INSTALL WIRELESS DOOR LOCK BUZZER (a) Connect the connector. (b) Attach the clamp to install the wireless door lock buzzer. 2. INSTALL FRONT FENDER LINER LH (w/ Intuitive Parking Assist System) (a) Install the front fender liner ...

Power Window Switch Malfunction (B2312)
DESCRIPTION The power window regulator motor is driven by operating the power window regulator switch. The power window regulator motor assembly consists of the motor and ECU. This DTC is output when the ECU built into the regulator motor and master switch ...