INSTALLATION
PROCEDURE
1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR
(a) Attach the 2 claws to install the sensor. |
|
(b) Connect the connector.
2. INSTALL NO. 3 HEATER TO REGISTER DUCT
3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
5. INSTALL NO. 1 HEATER TO REGISTER DUCT
6. INSTALL NO. 2 HEATER TO REGISTER DUCT
7. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(a) Install the instrument panel sub-assembly (See page ).
Customize Parameters
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
NOTICE:
When the customer requests a change in a function, first make sure that
the function can be customized.
Be sure to make a note of the current settings before customizing.
...
Terminals Of Ecu
TERMINALS OF ECU
1. REAR TELEVISION CAMERA ASSEMBLY
(a) Disconnect the Y2 rear television camera assembly connector.
(b) Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol)
Wiring Color
...