INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL FRONT BUMPER BAR REINFORCEMENT LH (w/o Intuitive Parking Assist System)
(a) Install the front bumper bar reinforcement LH with the 3 screws.
2. INSTALL FRONT BUMPER BAR REINFORCEMENT LH (w/ Intuitive Parking Assist System)
(a) Install the front bumper bar reinforcement LH with the 2 screws.
3. INSTALL HEADLIGHT ASSEMBLY LH
(a) Connect the 4 connectors and install the headlight assembly LH.
(b) Install the 3 screws and bolt.
Torque:
5.5 N·m {56 kgf·cm, 49 in·lbf}
4. INSTALL FRONT BUMPER COVER (w/o Intuitive Parking Assist System)
(See page )
5. INSTALL FRONT BUMPER COVER (w/ Intuitive Parking Assist System)
(See page )
6. INSTALL FRONT FENDER MAIN SEAL LH
7. INSTALL FRONT FENDER MAIN SEAL RH
HINT:
Use the same procedure as for the LH side.
8. INSTALL UPPER RADIATOR SUPPORT SEAL
9. ADJUST HEADLIGHT AIMING
(See page )
10. ADJUST FOG LIGHT AIMING
(See page )
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed
for that code. For details of the code, refer to the "See page" below.
Sliding Roof System
DTC Code
Det ...
Front Passenger Side Solar Sensor Short Circuit (B14A3)
DESCRIPTION
The automatic light control sensor (solar sensor), which is installed on the
upper side of the instrument panel, detects sunlight and controls the air conditioning
in auto mode. The output current from the solar sensor varies according to th ...