INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
Take extra care when handling these precision electronic components.
PROCEDURE
1. INSTALL TRANSMITTER BATTERY
(a) Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration. NOTICE:
|
|
(b) Install the cover.
2. INSTALL DOOR CONTROL TRANSMITTER PACKING
3. INSTALL DOOR CONTROL TRANSMITTER MODULE
(a) Install the door control transmitter module.
4. INSTALL TRANSMITTER HOUSING COVER
(a) Install the transmitter housing cover to the transmitter housing case.
(b) Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.
Center Airbag Sensor Communication Stop Mode
DESCRIPTION
Detection Item
Symptom
Trouble Area
Center Airbag Sensor Communication Stop Mode
Either condition is met:
"SRS Airbag" is not displayed on the "CAN Bus Check ...
Precaution
PRECAUTION
1. TIRE PRESSURE WARNING ECU EXPRESSIONS
(a) The tire pressure monitor receiver assembly is referred to as the tire pressure
warning ECU in this section.
2. TIRE PRESSURE WARNING SYSTEM PRECAUTION
(a) It is necessary for the tire pressures to ...