Toyota 4Runner manuals

Toyota 4Runner: Installation

INSTALLATION

PROCEDURE

1. INSTALL AIR CONDITIONING UNIT

(a) Install the air conditioning unit (See page ).


Inspection
INSPECTION PROCEDURE 1. INSPECT NO. 1 COOLER THERMISTOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Conne ...

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NO. 1 COOLER THERMISTOR NOTICE: If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted. (a) Insert the se ...

Other materials about Toyota 4Runner:

Transmitter Battery(w/ Smart Key System)
Replacement REPLACEMENT CAUTION / NOTICE / HINT NOTICE: Take extra care when handling these precision electronic components. PROCEDURE 1. REMOVE TRANSMITTER BATTERY (a) Push the release hook knob and extract the emergency key. ...

Test Mode Procedure
TEST MODE PROCEDURE 1. PERFORM SIGNAL CHECK HINT: When entering signal check mode, the tire pressure warning ECU stores all the signal check DTCs first. After completing the signal check for each inspection item, the DTCs for systems that ar ...

© 2016-2024 | www.to4runner.net

0.007