INSTALLATION
PROCEDURE
1. INSTALL CENTER POWER OUTLET SOCKET COVER
(a) Attach the 2 claws to install the center power outlet socket cover.
HINT:
Use the same procedure as for the other sides.
2. INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY
(a) Attach the claw to install the No. 3 power outlet socket assembly.
(b) Attach the connector clamp.
HINT:
Use the same procedure as for the other sides.
3. INSTALL REAR CONSOLE END PANEL
4. INSTALL NO. 1 POWER OUTLET SOCKET COVER
(a) Attach the 2 claws to install the No. 1 power outlet socket cover.
5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
(a) Attach the claw to install the No. 1 power outlet socket assembly.
(b) Connect the No. 1 power outlet socket assembly connector.
6. INSTALL REAR CONSOLE BOX ASSEMBLY
7. INSTALL NO. 2 CONSOLE BOX RETAINER
8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)
10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
11. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
12. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
13. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
14. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
Messages displayed on the accessory meter
Depending on switch operation, one of the following messages may appear on
the accessory meter to provide guidance on transfer mode selection etc:
Multi-terrain Select is temporarily canceled when
The front-wheel drive control lever or switch is shift ...
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK OCCUPANT CLASSIFICATION ECU
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
a9-1 (+B) - a9-3 (GND)
W - W-B
...