INSTALLATION
PROCEDURE
1. INSTALL REFRESHING SEAT SWITCH
(a) Attach the 4 claws to install the refreshing seat switch.
2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
3. INSTALL NO. 2 CONSOLE BOX RETAINER
4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)
7. INSTALL HEATER CONTROL ASSEMBLY
8. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
9. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
Torque:
5.4 N·m {55 kgf·cm, 48 in·lbf}
11. CHECK SRS WARNING LIGHT
(See page )
Fail-safe Chart
FAIL-SAFE CHART
1. FAIL-SAFE
This function minimizes the loss of ECT functions when a malfunction occurs in
a sensor or solenoid.
Malfunction Part
Function
No. 1 ATF temperature sensor
During a No. 1 ATF t ...
Data Signal Circuit between Navigation Receiver Assembly and Extension Module
DESCRIPTION
The stereo component tuner assembly sends the sound data signal or image data
signal from a device to the navigation receiver assembly via this circuit.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
After replacing the navigation receiver ...