Toyota 4Runner: Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)
(a) Install the curtain shield airbag with the new 14 bolts.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
NOTICE:
Do not twist the curtain shield airbag when installing it.
|
(b) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. |
|
2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)
(a) Install the curtain shield airbag with the new 11 bolts.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
NOTICE:
Do not twist the curtain shield airbag when installing it.
|
(b) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. |
|
3. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining (See page .gif)
).
On-vehicle Inspection
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. CHECK CURTAIN SHI ...
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. REMOVE ROOF HEADLINING ASSEMBLY ...
Other materials about Toyota 4Runner:
Precaution
PRECAUTION
1. TIRE PRESSURE WARNING ECU EXPRESSIONS
(a) The tire pressure monitor receiver assembly is referred to as the tire pressure
warning ECU in this section.
2. TIRE PRESSURE WARNING SYSTEM PRECAUTION
(a) It is necessary for the tire pressures to ...
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful bec ...
0.026