INSTALLATION
PROCEDURE
1. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
(a) Attach the 5 hooks (A). Text in Illustration
|
|
(b) Attach the 5 hooks (B) to install the instrument panel passenger airbag.
(c) Install the 2 screws.
2. INSTALL NO. 2 INSTRUMENT PANEL WIRE
(a) Connect the 2 connectors to install the wire.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.
(b) Attach the clamp.
3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
(a) Install the instrument panel sub-assembly (See page ).
Rear Power Window RH does not Operate with Rear Power Window Switch RH
DESCRIPTION
If the manual up/down function does not operate, there may be a malfunction
in the rear power window regulator switch, rear power window regulator motor,
harness or connector.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE ...
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after d ...