INSTALLATION
PROCEDURE
1. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
(a) Connect the connector. NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness. |
|
(b) Attach the 8 claws to install the instrument panel airbag.
(c) Install the 3 bolts.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
2. INSTALL LOWER INSTRUMENT COVER LH
3. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
6. INSTALL COWL SIDE TRIM BOARD RH
7. INSTALL DOOR SCUFF PLATE ASSEMBLY RH
HINT:
Use the same procedure as for the LH side (See page ).
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
9. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light (See page ).
Satellite Radio Broadcast cannot be Received
CAUTION / NOTICE / HINT
NOTICE:
Some satellite radio broadcasts require payment. A contract must be
made between a satellite radio company and the user. If the contract expires,
it will not be possible to listen to the broadcast.
After re ...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple
suspected areas are listed, the potential causes of the symptoms are listed in order
of probability in the "Suspected Area" column of ...