INSTALLATION
PROCEDURE
1. INSTALL CERTIFICATION ECU
(a) Attach the 2 claws to install the certification ECU.
2. INSTALL ECU INTEGRATION BOX RH
(a) Install the certification ECU with bracket with the 2 nuts and bolt.
(b) Attach the clamp and connect the connectors.
3. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY
4. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
5. INSTALL INSTRUMENT PANEL BOX DOOR COVER
6. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
7. INSTALL LOWER INSTRUMENT COVER LH
8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
9. INSTALL COWL SIDE TRIM BOARD RH
10. INSTALL DOOR SCUFF PLATE ASSEMBLY RH
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).
12. REGISTER ECU CODE
(a) Register the ECU code (See page ).
13. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light (See page ).
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful bec ...
Using the hands-free phone system for the first time
Before using the hands-free phone system, it is necessary to register a
cellular phone in the system. The phone registration mode will be entered
automatically when starting the system with no cellular phone registered. Follow
the procedure below to regi ...