Toyota 4Runner: Installation

Toyota 4Runner Service Manual / Vehicle Interior / Theft Deterrent / Keyless Entry / Engine Hood Courtesy Switch / Installation

INSTALLATION

PROCEDURE

1. INSTALL HOOD LOCK ASSEMBLY

(a) Apply MP grease to the sliding areas of the hood lock assembly.

(b) Connect the hood lock control cable assembly.

(d) Install the hood lock assembly with the 3 bolts in the order shown in the illustration.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

2. INSTALL HOOD LOCK CONTROL CABLE COVER

(a) Pass the hood lock control cable assembly through the hood lock control cable cover.

(b) Attach the claw to install the hood lock control cable cover.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

3. INSTALL LOW PITCHED HORN ASSEMBLY

4. INSTALL RADIATOR GRILLE BRACKET

5. INSTALL HIGH PITCHED HORN ASSEMBLY

6. INSTALL FRONT BUMPER COVER (w/ Intuitive Parking Assist System)

(See page )

7. INSTALL FRONT BUMPER COVER (w/o Intuitive Parking Assist System)

(See page )

Removal

REMOVAL PROCEDURE 1. REMOVE FRONT BUMPER COVER (w/o Intuitive Parking Assist System) (See page ) 2. REMOVE FRONT BUMPER COVER (w/ Intuitive Parking Assist System) (See page ) 3. REMOVE HIGH PI ...

Engine Immobiliser System(w/ Smart Key System)

...

Other materials about Toyota 4Runner:

System Description
SYSTEM DESCRIPTION 1. KEY REMINDER WARNING SYSTEM DESCRIPTION (a) When the driver side door is opened while the ignition switch is ACC or off and the key is in the ignition key cylinder, this system causes a buzzer to sound in order to warn the driver th ...

Security and system setup
To enter the menu of each setting, follow the steps below: Security setting items and operation procedure • Setting or changing the PIN (Personal Identification Number) 1. “Setup (Setup)” → 2. “Security” → 3. “Set PIN” • Locking the ...