INSTALLATION
CAUTION / NOTICE / HINT
PROCEDURE
1. INSTALL BRAKE MASTER CYLINDER SUB-ASSEMBLY
(a) Install a new O-ring to the brake master cylinder sub-assembly.
(b) Install the brake master cylinder sub-assembly with 2 nuts.
Torque:
13 N·m {127 kgf·cm, 9 ft·lbf}
(c) Using a union nut wrench, connect the 2 brake lines to the brake master cylinder sub-assembly. Text in Illustration
Torque: Specified tightening torque : 20 N·m {199 kgf·cm, 14 ft·lbf} HINT:
|
|
(d) Attach the clamp and connect the connector.
2. BLEED BRAKE SYSTEM
System Description
SYSTEM DESCRIPTION
1. NAVIGATION SYSTEM OUTLINE
(a) Vehicle position tracking methods
It is essential that the navigation system correctly tracks the current vehicle
position and displays it on the map. There are 2 methods to track the current vehicle
p ...
Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT DOOR LOCK ASSEMBLY LH
(a) Check the door lock motor operation.
(1) Apply battery voltage to the motor connector and check the operation of the
door lock.
Text in Illustration
*a
Lock
...