INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH
(a) Apply MP grease to a new O-ring.
(b) Install the O-ring to the axle hub.
NOTICE:
Do not damage the O-ring.
(c) Install the disc brake dust cover and axle hub to the steering knuckle with the 4 bolts.
Torque:
80 N·m {816 kgf·cm, 59 ft·lbf}
2. INSTALL FRONT DISC
3. INSTALL DISC BRAKE CYLINDER ASSEMBLY LH
4. INSTALL FRONT WHEEL
Torque:
for aluminum wheel :
103 N·m {1050 kgf·cm, 76 ft·lbf}
for steel wheel :
112 N·m {1142 kgf·cm, 83 ft·lbf}
5. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
(a) Inspect and adjust the front wheel alignment (See page ).
6. CHECK SPEED SENSOR SIGNAL
(a) Inspect the speed sensor signal (See page
).
Antenna Coil Open / Short (B2784)
DESCRIPTION
This DTC is stored when there is an open or short malfunction in the transponder
key amplifier coil (built into the engine switch).
DTC Code
DTC Detection Condition
Trouble Area
B2784
...
Cellular Phone Inspection
PROCEDURE
1.
CHECK USAGE CONDITION
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make
sure to obtain the per ...