Toyota 4Runner: Installation

Toyota 4Runner Service Manual / Drivetrain / Vf2a Transfer / 4wd / Awd / Transfer Assembly / Installation

INSTALLATION

PROCEDURE

1. INSTALL TRANSFER ASSEMBLY

(a) Install the transfer to the transmission.

(b) Install the 8 bolts.

Torque:

24 N·m {245 kgf·cm, 18 ft·lbf}

2. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

(a) Install the automatic transmission (See page ).

3. ADD TRANSFER OIL

4. CHECK FOR TRANSFER OIL LEAK

Reassembly

REASSEMBLY PROCEDURE 1. INSTALL TRANSFER DRIVE SPROCKET SUB-ASSEMBLY Text in Illustration *1 Shifting Key *2 Drive Sprocket *3 ...

Transfer Case Front Oil Seal

Components COMPONENTS ILLUSTRATION Replacement REPLACEMENT PROCEDURE 1. DRAIN TRANSFER OIL 2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY (a) Remove the front propeller shaft (See page ). ...

Other materials about Toyota 4Runner:

On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. CHECK SIDE AIRBAG SENSOR ASSEMBLY LH (VEHICLE NOT INVOLVED IN COLLISION) (a) ...

Voice Guidance does not Function
CAUTION / NOTICE / HINT NOTICE: After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary. PROCEDURE 1. CHECK VOICE GUIDANCE ...