Toyota 4Runner: Instrument Panel Speaker

Toyota 4Runner Service Manual / Audio / Visual / Telematics / Audio / Video / Instrument Panel Speaker

Components

COMPONENTS

ILLUSTRATION

Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE FRONT PILLAR GARNISH LH

2. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

3. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

(a) Remove the 2 screws.

Text in Illustration

for 9 Speakers

for 8 Speakers

(b) Disconnect the connector to remove the front No. 2 speaker assembly.

NOTICE:

Do not touch the cone of the front No. 2 speaker assembly.

4. REMOVE NO. 1 SPEAKER MOUNTING BRACKET (for 8 Speakers)

(a) Remove the 2 bolts and No. 1 speaker mounting bracket.

Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

(a) Temporarily replace the front No. 2 speaker assembly with a new or normally functioning one.

OK:

Malfunction disappears.

Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. INSTALL NO. 1 SPEAKER MOUNTING BRACKET (for 8 Speakers)

(a) Install the No. 1 speaker mounting bracket with the 2 bolts.

Torque:

2.5 N·m {25 kgf·cm, 22 in·lbf}

2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

(a) Connect the connector.

(b) Align the positioning pins of the front No. 2 speaker assembly with the instrument panel sub-assembly to temporarily install the front No. 2 speaker assembly.

Text in Illustration

for 9 Speakers

for 8 Speakers

Torque:

2.5 N·m {25 kgf·cm, 22 in·lbf}

NOTICE:

Do not touch the cone of the front No. 2 speaker assembly.
When installing the front No. 2 speaker assembly to the instrument panel sub-assembly, be careful that the wires do not get caught between the parts.

3. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY

4. INSTALL FRONT PILLAR GARNISH LH

Front Door Speaker

Components COMPONENTS ILLUSTRATION Removal REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. ...

Other materials about Toyota 4Runner:

Check Mode Procedure
CHECK MODE PROCEDURE 1. DESCRIPTION (a) Check mode has a higher sensitivity to malfunctions and can detect malfunctions that normal mode cannot detect. Check mode can also detect all the malfunctions that normal mode can detect. In check mode, DTCs are s ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very usefu ...

Toyota 4Runner: Instrument Panel Speaker

Front Door Speaker

Luggage Speaker

Other materials about Toyota 4Runner: