Toyota 4Runner manuals

Toyota 4Runner: Loading CDs

Loading a CD (type A and B)

Insert a CD.

 Loading a CD (type C)

Press
.


When the indicator on the slot turns
from amber to green, insert a CD.

Loading multiple CDs (type C only)

Press and hold
until you hear a beep.


When the indicator on the slot turns
from amber to green, insert a CD.

The indicator on the slot turns to amber when the CD is inserted.

When
the indicator on the slot turns from amber to green again, insert the next CD.

Repeat the procedure for the remaining CDs.

To cancel, press . If you do not insert a disc within
15 seconds, loading will be canceled automatically.

Using the CD player
Type A Type B and C ...

Ejecting CDs
Ejecting a CD (type A and B) Press and remove the CD. Ejecting a CD (type C) To select the CD to be ejected, press ( ) or ( ). The selected CD number is shown on the display. Press ...

Other materials about Toyota 4Runner:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE REAR AXLE SHAFT SNAP RING LH (a) Using a snap ring expander, remove the snap ring. 2. REMOVE REAR AXLE SHAFT LH (a) Using SST and a press, press out the rear axle shaft. SST: 09521-25023 SST: 09521-25011 ( ...

Installation
INSTALLATION PROCEDURE 1. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY LH NOTICE: The regulator arm must be below the intermediate position when installing the rear power window regulator motor assembly. (a) Using a T25 "TORX" sock ...

© 2016-2026 | www.to4runner.net

0.0078