Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE SPOT LIGHT ASSEMBLY
(a) Detach the claw and remove the light. |
|
(b) Disconnect the connector.
2. REMOVE SPOT LAMP BULB
(a) Detach the 4 claws and remove the lens. |
|
(b) Remove the bulb.
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL SPOT LAMP BULB
(a) Install the bulb.
(b) Attach the 4 claws to install the lens.
2. INSTALL SPOT LIGHT ASSEMBLY
(a) Connect the connector.
(b) Attach the claw to install the light.
Power Management Control ECU Communication Stop Mode
DESCRIPTION
Detection Item
Symptom
Trouble Area
Power Management Control ECU Communication Stop Mode
Either condition is met:
"Power Management1" is not displayed on the &quo ...
Power Seat Position is not Memorized
DESCRIPTION
When the seat memory SET switch and a memory switch (M1 or M2) are pressed simultaneously,
the main body ECU commands the position control ECU through CAN communication to
record the value of each position sensor.
WIRING DIAGRAM
CAUTION / ...