Components
COMPONENTS
ILLUSTRATION
Inspection
INSPECTION
PROCEDURE
1. INSPECT LUMBAR SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection |
Switch Condition |
Specified Condition |
---|---|---|
3 (H) - 5 (B) |
Hold |
Below 1 Ω |
1 (R) - 2 (E2) |
||
2 (E2) - 3 (H) |
Off |
|
2 (E2) - 1 (R) |
||
2 (E2) - 3 (H) |
Release |
|
1 (R) - 5 (B) |
If the result is not as specified, replace the lumbar switch.
Text in Illustration
*1 |
Hold Switch |
*2 |
Release Switch |
*a |
Component without harness connected (Lumbar Switch) |
Removal
REMOVAL
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY
(a) Remove the front seat assembly (See page
).
2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
3. REMOVE RECLINING POWER SEAT SWITCH KNOB
4. REMOVE FRONT SEAT CUSHION SHIELD LH
5. REMOVE FRONT POWER SEAT SWITCH LH
6. REMOVE LUMBAR SWITCH ASSEMBLY
(a) Using a screwdriver, detach the 2 claws.
(b) Disconnect the lumbar switch connector and remove the lumbar switch.
Installation
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
PROCEDURE
1. INSTALL LUMBAR SWITCH ASSEMBLY
(a) Connect the lumbar switch connector.
(b) Attach the 2 claws to install the lumbar switch.
2. INSTALL FRONT POWER SEAT SWITCH LH
3. INSTALL FRONT SEAT CUSHION SHIELD LH
4. INSTALL RECLINING POWER SEAT SWITCH KNOB
5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
6. INSTALL FRONT SEAT ASSEMBLY
(a) Install the front seat assembly (See page
).
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
A bolt without a torque specification is shown in the standard bolt chart (See
page ).
PROCEDURE
1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY
(a) Attach the 2 claws to install the air conditioning amplifier ...
Adjusting the settings
Basic setting
To turn on the air conditioning
system and adjust the fan speed, turn the fan speed control knob clockwise
(increase) or counterclockwise (decrease).
Turning the knob to “OFF” turns off the fan.
To adjust the temperature
setting, t ...