Toyota 4Runner manuals

Toyota 4Runner: Menu list of the Bluetooth® audio system


“BT Audio Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.

When using a voice command

For numbers, say a combination of single digits from zero to nine.

Say the command correctly and clearly.

Situations that the system may not recognize your voice

• When driving on rough roads

• When driving at high speeds

• When air is blowing out of the vents onto the microphone

• When the air conditioning fan emits a loud noise

Operations that cannot be performed while driving

• Operating the system with



• Registering a portable player to the system

Changing the passkey

Operating the system using voice commands
By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio system without the need to check the display or operate . Operati ...

Operating a Bluetooth® enabled portable player
Selecting an album Press “∨” or “∧” on . Selecting tracks Press “∧” or “∨” on . Playing and pausing tracks Press . Fast-forwarding and reversing tracks Press and hold ...

Other materials about Toyota 4Runner:

On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE FRONT WHEEL 2. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH 3. REMOVE FRONT DISC 4. INSPECT FRONT AXLE HUB BEARING LOOSENESS (a) Using a dial indicator, measure the looseness near the center of the ...

KDSS ECU Malfunction (C1881/81)
DESCRIPTION The stabilizer control ECU stores DTC C1881/81 when internal ECU malfunctions occur. DTC Code DTC Detection Condition Trouble Area C1881/81 Either condition is met: A no ...

© 2016-2024 | www.to4runner.net

0.0065