Toyota 4Runner: Multi-terrain Select Indicator Light Remains ON
DESCRIPTION
Refer to Multi-terrain Select Indicator Light does not Come ON (See page
.gif)
).
WIRING DIAGRAM
Refer to Multi-terrain Select Indicator Light does not Come ON (See page
).
PROCEDURE
|
1. |
READ VALUE USING TECHSTREAM (OFF-ROAD GUIDANCE SWITCH (MULTI-TERRAIN SELECT SWITCH)) |
| OK | .gif) |
GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) |
| NG | |
REPLACE DRIVE MONITOR SWITCH |
Crawl Indicator Light does not Come ON
DESCRIPTION
If any of the following conditions are met, the crawl indicator light blinks
and crawl control is stopped.
Crawl control is operated when the vehicle stability control system
...
Multi-terrain Select Indicator Light does not Come ON
DESCRIPTION
When the ON/OFF switch of the multi-terrain select switch is turned on, multi-terrain
select control is enabled and the multi-terrain select indicator light illuminates.
After selectin ...
Other materials about Toyota 4Runner:
Transfer Case Front Oil Seal
Components
COMPONENTS
ILLUSTRATION
Replacement
REPLACEMENT
PROCEDURE
1. DRAIN TRANSFER OIL
2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(a) Remove the front propeller shaft (See page
).
3. REMOVE FRONT OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY ...
Fuel Sender Open Detected (B1500)
DESCRIPTION
This DTC is stored when the combination meter detects a fuel sender gauge malfunction.
DTC Code
DTC Detection Condition
Trouble Area
B1500
IG voltage is 9.5 V or higher and the followin ...
0.026