Toyota 4Runner manuals

Toyota 4Runner: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT STEERING WHEEL FREE PLAY

(a) Stop the vehicle and align the tires so that they face straight ahead.

(b) Gently turn the steering wheel right and left by hand and check the steering wheel free play.

Maximum free play:

30 mm (1.18 in.)

Text in Illustration

*a

Maximum Free Play

If the free play is more than the maximum, check the steering column, steering intermediate shaft, steering sliding yoke and steering gear.


Adjustment
ADJUSTMENT PROCEDURE 1. STEERING OFF CENTER ADJUSTMENT PROCEDURE HINT: This is the adjustment procedure for when the steering is off center. (a) Check if the steering wheel is off center. ...

Steering Wheel
...

Other materials about Toyota 4Runner:

Back Door Garnish(for Side)
Components COMPONENTS ILLUSTRATION Installation INSTALLATION PROCEDURE 1. INSTALL BACK DOOR OUTSIDE MOULDING LH (a) Attach the 5 clips to install the back door outside moulding. 2. INSTALL BACK DOOR OUTSIDE MOULDING RH HINT: Use the same proced ...

Removal
REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ). 2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL LH 3. REMOVE REAR DO ...

© 2016-2024 | www.to4runner.net

0.0295