ON-VEHICLE INSPECTION
PROCEDURE
1. CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check (See page ).
(b) With the instrument panel passenger airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag with a new one:
Cuts, minute cracks or marked discoloration on the instrument panel passenger airbag.
2. CHECK INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check (See page ).
(b) With the instrument panel passenger airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the instrument panel passenger airbag with a new one:
CAUTION:
For removal and installation of the instrument panel passenger airbag, be sure to follow the correct procedure.
Speaker Circuit
DESCRIPTION
If there is a short in a speaker circuit, the stereo component amplifier
assembly detects it and stops output to the speakers.
Thus sound cannot be heard from the speakers even if there is no malfunction
in the stereo component ...
Steering Pad Switch Circuit
DESCRIPTION
This circuit sends an operation signal from the steering pad switch assembly
to the radio and display receiver assembly.
If there is an open in the circuit, the radio system cannot be operated using
the steering pad switch assembly.
If there ...