ON-VEHICLE INSPECTION
PROCEDURE
1. CHECK LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check (See page ).
(b) With the lower No. 1 instrument panel airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the lower No. 1 instrument panel airbag with a new one:
Cuts, minute cracks or marked discoloration on the lower No. 1 instrument panel airbag.
2. CHECK LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check (See page ).
(b) With the lower No. 1 instrument panel airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the lower No. 1 instrument panel airbag with a new one:
CAUTION:
For removal and installation of the lower No. 1 instrument panel airbag, be sure to follow the correct procedure.
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)
(a) Remove the No. 1 roof silencer pad.
2. REMOVE NO. 2 ROOF SILENCER PAD
(a) w/o Sliding Roof:
Remove the 2 No. 2 roof silencer pads.
(b) w/ Sliding Roof:
Remo ...
Portable Player cannot be Operated Using In-vehicle Device or Track Information
is not Displayed on In-vehicle Device
PROCEDURE
1.
CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
(a) Check if track information is displayed normally on another "Bluetooth" audio
compatible vehicle of the same model.
...