ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to follow the correct removal and installation procedures for the occupant classification ECU.
PROCEDURE
1. CHECK OCCUPANT CLASSIFICATION ECU (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check (See page ).
2. CHECK OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check (See page ).
(b) Visually check for the following defects of the occupant classification ECU:
OK:
No defects are found.
HINT:
If any of the defects is found, replace the occupant classification ECU with a new one.
3. CHECK OCCUPANT CLASSIFICATION ECU (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)
(a) Perform a diagnostic system check (See page ).
(b) Visually check for the following defects of the occupant classification ECU:
OK:
No defects are found.
HINT:
If any of the defects is found, replace the occupant classification ECU with a new one.
Installation
INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
A bolt without a torque specification is shown in the standard bolt chart (See
page ).
PROCEDURE
1. INSTALL REAR SEAT CUSHION ...
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT
(a) Secure SST in a vise.
SST: 09727-30021
09727-00010
09727-00031
SST: 09727-00060
(b) Attach the ar ...