Toyota 4Runner: Operation Check
OPERATION CHECK
1. CHECK WINDOW DEFOGGER SYSTEM OPERATION
(a) When the ignition switch is turned to ON and the heater control (window defogger switch) is pressed, check that the window defogger operates.
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Inspect the window defogger system after confirming that the back door
power window system of the power window control system is operating normally.
...
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms.
If multiple suspected areas are listed, the potential causes of the symptoms
are lis ...
Other materials about Toyota 4Runner:
Runnable Signal Malfunction (B2286,P0335)
DESCRIPTION
The power management control ECU and ECM are connected by a cable and the CAN
communication lines. These DTCs are stored when the crankshaft position sensor signal
information from the cable and the crankshaft position sensor signal informatio ...
Transmission Control Cable
Components
COMPONENTS
ILLUSTRATION
Removal
REMOVAL
PROCEDURE
1. REMOVE CONSOLE BOX ASSEMBLY
(a) Remove the console box assembly (See page
).
2. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Move the shift lever to N.
(b) Disconne ...
0.0064