Toyota 4Runner: Points to remember
Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat.
• Choose a child restraint system that suits your vehicle and is appropriate to the age and size of the child.
• For installation details, follow the instructions provided with the child restraint system.
General installation instructions are provided in this manual.
Child restraint systems
A child restraint system for a small child or baby must itself be properly
restrained on the seat with the lap portion of the lap/shoulder belt.
The laws of all 50 states of the U.S.A. and Canada n ...
Types of child restraints
Child restraint systems are classified into the following 3 types according
to the age and size of the child:
Rear facing — Infant seat/convertible seat
Forward facing — Convertible seat
...
Other materials about Toyota 4Runner:
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL FRONT DRIVE SHAFT DUST COVER
(a) Using SST and a press, install a new dust cover.
SST: 09527-10011
2. INSTALL SHAFT SNAP RING
(a) Install a new snap ring.
3. INSTALL OUTBOARD JOINT BOOT
HINT:
Before installing the ...
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
HINT:
When DTC B1650/32 is stored as a result of troubleshooting for the airbag system,
perform troubleshooting for the occupant classification system.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch t ...
0.0084