Toyota 4Runner manuals

Toyota 4Runner: Poor Sound Quality in All Modes (Low Volume)

PROCEDURE

1.

CHECK AUDIO SETTINGS

(a) Set "Treble", "Mid" and "Bass" to the initial values and check that sound is normal.

OK:

Malfunction disappears.

HINT:

Sound quality adjustment measures vary according to the type of amplifier.


OK

END

NG

2.

COMPARE WITH ANOTHER VEHICLE OF SAME MODEL

(a) Compare with another vehicle of the same model which does not have trouble to see if there is any difference in the sound quality.

OK:

No difference is found.


OK

END


NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Screen Flicker or Color Distortion
PROCEDURE 1. CHECK DISPLAY SETTING (a) Reset display settings (contrast, brightness) and check that the screen appears normal. OK: The display returns to normal. ...

Voice Guidance does not Function
PROCEDURE 1. CHECK VOICE GUIDANCE SETTING (a) Display the "Voice Settings" screen. (b) Check if the "Voice Recognition Prompts" is not "Off& ...

Other materials about Toyota 4Runner:

Communication Malfunction (Bus Ic) (B1497)
DESCRIPTION The air conditioning harness assembly connects the No. 1 air conditioning amplifier assembly and each servo motor. The No. 1 air conditioning amplifier assembly supplies power and sends operation instructions to each servo motor through the No ...

Test Mode Procedure
TEST MODE PROCEDURE NOTICE: After replacing the master cylinder solenoid and/or yaw rate and acceleration sensor, perform calibration. VSC is prohibited during test mode. HINT: By switching the skid control ECU from normal mod ...

© 2016-2026 | www.to4runner.net

0.0071