Inspection
INSPECTION
PROCEDURE
1. INSPECT TRANSFER INPUT SHAFT
(a) Using a micrometer, measure the diameter of the input shaft journal.
Minimum diameter:
47.59 mm (1.88 in.)
If the diameter is less than the minimum, replace the input shaft.
(b) Usin ...
Back Door Power Window Switch ON Stuck (B2312)
DESCRIPTION
This DTC is stored when the back door power window regulator motor is stuck.
NOTICE:
When a power window regulator is reinstalled or replaced, the power window control
system must be initialized.
Back Door P/W
DTC Code
...