PRECAUTION
1. PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK
(a) After replacing the steering lock actuator assembly (steering lock ECU), perform key ID code registration.
(b) After replacing the steering lock actuator assembly (steering lock ECU), confirm the lock/unlock operation of the steering lock.
Operation Confirmation:
Steering Lock Condition |
Procedure |
---|---|
Lock |
With the engine switch off, open and close any door. |
Unlock |
Turn the engine switch from off to on (ACC) or on (IG). |
(c) If checking for DTCs of the smart key system or if checking the Data List with the engine switch off, make sure that the driver door is open.
HINT:
When using the Techstream with the engine switch off to troubleshoot, connect the Techstream to the vehicle and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.
(d) When a steering lock system DTC is output, confirm and record the DTCs before turning the engine switch off or clearing the DTCs, as past DTCs are not stored in the certification ECU.
Fuel Receiver Gauge Malfunction
DESCRIPTION
The fuel sender gauge has a variable resistance mechanism. The resistance
decreases when the fuel amount increases, and the resistance increases when
the fuel amount decreases. The fuel receiver gauge changes based on the
resist ...
Customize Parameters
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM
HINT:
The following items can be customized.
NOTICE:
When the customer requests a change in a function, first make sure that
the function can be customized.
Record the current se ...