PROBLEM SYMPTOMS TABLE
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Kinetic Dynamic Suspension System
Symptom |
Suspected Area |
See page |
---|---|---|
The height of the left and right side of the vehicle is different |
Perform air bleeding |
|
The height of the left and right side of the vehicle is different even after bleeding air |
Front stabilizer control cylinder |
|
Rear stabilizer control cylinder |
|
|
Stabilizer control with accumulator housing assembly |
|
|
Excessive roll (Decrease in roll stiffness) |
Bushes or similar parts are missing or damaged |
- |
Oil leakage |
|
|
Perform air bleeding |
|
|
Excessive roll even after bleeding air |
Stabilizer control with accumulator housing assembly |
|
Excessive roll even after replacing stabilizer control with accumulator housing assembly |
Front stabilizer control cylinder |
|
Rear stabilizer control cylinder |
|
Compressor Lock Sensor Circuit (B1422)
SYSTEM DESCRIPTION
The ECM sends the engine speed signal to the air conditioning amplifier assembly
via CAN communication.
The air conditioning amplifier assembly reads the difference between compressor
speed and engine speed. When the difference becomes ...
Components
COMPONENTS
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
...