PROBLEM SYMPTOMS TABLE
HINT:
Symptom |
Suspected Area |
See page |
---|---|---|
Sliding function and tilt function do not operate |
Refer to "Sliding Roof ECU Power Source Circuit" |
|
Refer to "Sliding Roof Control Switch Circuit" |
|
|
Either sliding function or tilt function does not operate |
Refer to "Sliding Roof Control Switch Circuit" |
|
Key-off operation does not operate |
Front door courtesy light switch assembly LH |
|
Main body ECU (multiplex network body ECU) |
|
|
Sliding roof drive gear sub-assembly (sliding roof ECU) |
|
|
Wireless transmitter-linked operation does not operate |
Refer to "Wireless Door Lock Control System (w/o Smart Key System)" |
|
Refer to "Wireless Door Lock Control System (w/ Smart Key System)" |
|
|
Refer to "Power Window Control System" |
|
|
Sliding roof drive gear sub-assembly (sliding roof ECU) |
|
|
Key-linked operation does not operate |
Refer to "Power Door Lock Control System" |
|
Refer to "Power Window Control System" |
|
|
Sliding roof drive gear sub-assembly (sliding roof ECU) |
|
|
Jam protection function does not operate |
Glass position initialization |
|
Sliding roof drive gear sub-assembly (sliding roof ECU) |
|
Steering Angle Sensor Power Source Voltage Malfunction (C1432)
DESCRIPTION
Steering angle sensor signals are sent to the skid control ECU via the CAN communication
system. When there is a malfunction in the CAN communication system, it is detected
by the steering angle sensor zero point malfunction diagnostic functio ...
Green And Red Indicators Blink Simultaneously
DESCRIPTION
After the ignition switch is turned to ON, the DCM (Telematics Transceiver) will
enter a self check mode. The manual (SOS) switch red indicator will illuminate for
2 seconds and turn off followed by the manual (SOS) switch green indicator illu ...