Toyota 4Runner: Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
|
Symptom |
Suspected Area |
See page |
|---|---|---|
|
The front passenger seat condition differs from that indicated by the passenger airbag ON/OFF indicator (DTC is not stored) |
Trouble in Passenger Airbag ON/OFF Indicator |
|
.gif)
System Description
SYSTEM DESCRIPTION
1. DESCRIPTION OF OCCUPANT CLASSIFICATION SYSTEM
(a) GENERAL DESCRIPTION
(1) In the occupant classification system, the occupant classification ECU calculates
the weight of the ...
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK OCCUPANT CLASSIFICATION ECU
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
...
Other materials about Toyota 4Runner:
Speed Signal Circuit
DESCRIPTION
The vehicle speed signal consists of pulses sent to the combination meter assembly
from the master cylinder solenoid (skid control ECU)*1 or skid control ECU (brake
actuator assembly)*2.
*1: for 4WD
*2: for 2WD
WIRING DIAGRA ...
Pressure Sensor Malfunction / Upside (C1812/12)
DESCRIPTION
In the KDSS hydraulic circuit, the fluid is contained under pressure. If the
fluid temperature is 20°C (68°F), the pressure is approximately 3.0 MPa (30.6 kgf/cm2,
435 psi).
DTC Code
DTC Detection Condition
...
0.0066