PROBLEM SYMPTOMS TABLE
HINT:
NOTICE:
When replacing the master cylinder or sensor, turn the ignition switch off.
Vehicle Stability Control System
Symptom |
Suspected Area |
See page |
---|---|---|
ABS, BA and/or EBD does not operate |
Check for DTCs again and make sure that no DTC is output |
|
IG power source circuit |
|
|
Front speed sensor circuit |
|
|
Rear speed sensor circuit |
|
|
Master cylinder pressure sensor (check master cylinder pressure sensor by performing test mode inspection) |
|
|
Check hydraulic brake booster with Techstream. If abnormal, check hydraulic circuit for leakage. |
|
|
If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid |
|
|
ABS, BA and/or EBD does not operate efficiently |
Check for DTCs again and make sure that no DTC is output |
|
Front speed sensor circuit |
|
|
Rear speed sensor circuit |
|
|
Stop light switch circuit |
|
|
Master cylinder pressure sensor (check master cylinder pressure sensor by performing test mode inspection) |
|
|
Check hydraulic brake booster with Techstream. If abnormal, check hydraulic circuit for leakage. |
|
|
If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid |
|
|
VSC and/or TRAC does not operate |
Check for DTCs again and make sure that no DTC is output |
|
IG power source circuit |
|
|
Front speed sensor circuit |
|
|
Rear speed sensor circuit |
|
|
Yaw rate and acceleration sensor circuit |
|
|
Steering angle sensor circuit |
|
|
If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid |
|
|
Sensor and switch signal check cannot be performed |
TS and CG terminal circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
DTC check cannot be performed |
Check for DTCs again and make sure that no DTC is output |
|
TC and CG terminal circuit |
|
|
IG power source circuit (high power supply voltage malfunction) |
|
|
If symptoms still occur even after above circuits in suspected areas are inspected and proved to be normal, replace master cylinder solenoid |
|
|
ABS warning light abnormal (Remains on) |
ABS warning light circuit |
|
IG power source circuit (high power supply voltage malfunction) |
|
|
Master cylinder solenoid (skid control ECU) |
|
|
ABS warning light abnormal (Does not come on) |
ABS warning light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
BRAKE warning light abnormal (Remains on) |
BRAKE warning light circuit |
|
IG power source circuit (high power supply voltage malfunction) |
|
|
Master cylinder solenoid (skid control ECU) |
|
|
BRAKE warning light abnormal (Does not come on) |
BRAKE warning light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
Slip indicator light abnormal (Remains on) |
Slip indicator light circuit |
|
IG power source circuit (high power supply voltage malfunction) |
|
|
Master cylinder solenoid (skid control ECU) |
|
|
Slip indicator light abnormal (Does not come on) |
Slip indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
VSC OFF indicator light abnormal (Remains on) |
VSC OFF indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
VSC OFF indicator light abnormal (Does not come on) |
VSC OFF indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
AUTO LSD indicator light abnormal (Remains on) |
AUTO LSD indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
AUTO LSD indicator light abnormal (Does not come on) |
AUTO LSD indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
Meter buzzer abnormal |
Skid control buzzer circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
TRAC OFF indicator light abnormal (Remains on) |
TRAC OFF indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
TRAC OFF indicator light abnormal (Does not come on) |
TRAC OFF indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
A-TRAC indicator light abnormal (Remains on) |
A-TRAC indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
A-TRAC indicator light abnormal (Does not come on) |
A-TRAC indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
Crawl indicator light abnormal (Remains on) |
Crawl indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
Crawl indicator light abnormal (Does not come on) |
Crawl indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
Multi-terrain select indicator light abnormal (Remains on) |
Multi-terrain select indicator light circuit |
|
Multi-terrain select indicator light abnormal (Does not come on) |
Multi-terrain select indicator light circuit |
|
Downhill assist control indicator light abnormal (Remains on) |
Downhill assist control indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
|
Downhill assist control indicator light abnormal (Does not come on) |
Downhill assist control indicator light circuit |
|
Master cylinder solenoid (skid control ECU) |
|
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL FRONT DIFFERENTIAL SIDE GEAR SHAFT BEARING RH
(a) Using SST and a press, press in the shaft bearing.
SST: 09223-00010
(b) Using a snap ring expander, install the snap ring.
HINT:
Install the snap ring securely.
2. INST ...
CD Sound Skips
CAUTION / NOTICE / HINT
NOTICE:
After replacing the navigation receiver assembly of vehicles subscribed to pay-type
satellite radio broadcasts, XM radio ID registration is necessary.
PROCEDURE
1.
CHECK DISC
(a) ...