Toyota 4Runner: Rear Axle Hub Bolt

Toyota 4Runner Service Manual / Drivetrain / Axle And Differential / Rear Axle Hub Bolt

Components

COMPONENTS

ILLUSTRATION

Replacement

REPLACEMENT

CAUTION / NOTICE / HINT

HINT:

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

PROCEDURE

1. REMOVE REAR WHEEL

2. REMOVE PARKING BRAKE ASSEMBLY

(a) Remove the parking brake assembly (See page ).

3. REMOVE REAR AXLE HUB BOLT LH

(a) Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.

SST: 09650-17011

Text in Illustration

*1	Nut
*a	Turn
*b	Hold

NOTICE:

Do not deform the oil deflector.
Make sure to align the notch of SST with the flange of the oil deflector.

4. INSTALL REAR AXLE HUB BOLT LH

(a) Insert a new hub bolt.

(b) Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

Text in Illustration

*1	Washer
*2	Nut
*a	Turn
*b	Hold

NOTICE:

Install a hub nut to prevent damage to the hub bolt.

(c) Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

(d) Remove the hub nut and washer.

NOTICE:

Do not damage the threads of the hub bolt.

5. INSTALL PARKING BRAKE ASSEMBLY

(a) Install the parking brake assembly (See page ).

6. INSTALL REAR WHEEL

Torque:

for aluminum wheel :

103 N·m {1050 kgf·cm, 76 ft·lbf}

for steel wheel :

112 N·m {1142 kgf·cm, 83 ft·lbf}

Front Differential Side Gear Shaft Oil Seal(for 4wd)

Components COMPONENTS ILLUSTRATION Replacement REPLACEMENT CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the ...

Rear Axle Shaft

...

Other materials about Toyota 4Runner:

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" ...

Data List / Active Test
DATA LIST / ACTIVE TEST 1. READ DATA LIST HINT: Using the Techstream to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful be ...